Original Factory Electrode Graphite Rod - HP Graphite Electrode for Steel Making – MORKIN
Original Factory Electrode Graphite Rod - HP Graphite Electrode for Steel Making – MORKIN Detail:
The Introduction of HP Graphite Electrode
High power graphite electrode is produced by low-sulfur content petroleum coke (or needle coke) as raw materials and coal asphalt as binder through calcination, crushing, batching, kneading, molding, baking, impregnation, rebaking, graphitization and machining. Its physical and mechanical properties are higher than regular power graphite electrode, such as low resistivity and large current density.
The Application of HP Graphite Electrode
(1) For steel smelting in electric arc furnace/ladle furnace
(2) HP Graphite electrode is mainly used in Electric arc furnace for steel making. When graphite electrode is working in EAF, the current will be introduced by graphite electrode into the furnace, and there will be heat source which is generated by electric arc between electrode end and furnace charge for smelting.
(3)For corundum smelting in electric furnace
(4)Used for processing special-shaped graphite products
The blank of graphite electrode is also used to process various special-shaped graphite prod and graphite crucible,etc..
The Production Processes of Graphite Electrode
The Chemical and Physical Indexes of HP Graphite Electrode
Item
|
Unit
|
HP | |
φ200-φ700mm | |||
Resistivity | Electrode | μΩm | 5.8-6.6 |
Nipple | 3.5-4.0 | ||
Modulus of Rupture | Electrode | Mpa | 10.0-13.0 |
Nipple | 20.0-23.0 | ||
Young’s Modulus | Electrode | GPa | 8.0-12.0 |
Nipple | 14.0-16.0 | ||
Bulk Density | Electrode | g/cm3 | 1.64-1.68 |
Nipple | 1.75-1.80 | ||
CTE (100-600℃) | Electrode | 10-6/℃ | 1.6-1.9 |
Nipple | 1.1-1.4 | ||
Ash | % | 0.3 |
The Current Carrying Capacity of Graphite Electrode
Nominal Diameter |
RP |
HP |
UHP |
||||
Millimeter |
Inch |
Current Carrying Capacity |
Current Density |
Current Carrying Capacity |
Current Density |
Current Carrying Capacity |
Current Density |
mm |
inch |
A |
A/cm2 |
A |
A/cm2 |
A |
A/cm2 |
75 |
3’’ |
1000-1400 |
22-31 |
||||
100 |
4’’ |
1500-2400 |
19-30 |
||||
130 |
5’’ |
2200-3400 |
17-26 |
||||
150 |
6’’ |
3000-4500 |
16-25 |
||||
200 |
8’’ |
5000-6900 |
15-21 |
5500-6900 |
18-25 |
||
250 |
10’’ |
7000-10000 |
14-20 |
6500-10000 |
18-25 |
8100-12200 |
20-30 |
300 |
12’’ |
10000-13000 |
14-18 |
13000-17400 |
17-24 |
15000-22000 |
20-30 |
350 |
14’’ |
13500-18000 |
14-18 |
17400-24000 |
17-24 |
20000-30000 |
20-30 |
400 |
16’’ |
18000-23500 |
14-18 |
21000-31000 |
16-24 |
25000-40000 |
19-30 |
450 |
18’’ |
22000-27000 |
13-17 |
25000-40000 |
15-24 |
32000-45000 |
19-27 |
500 |
20’’ |
25000-32000 |
13-16 |
30000-48000 |
15-24 |
38000-55000 |
18-27 |
550 |
22’’ |
28000-34000 |
12-14 |
34000-53000 |
14-22 |
45000-65000 |
18-27 |
600 |
24’’ |
30000-36000 |
11-13 |
38000-58000 |
13-21 |
50000-75000 |
18-26 |
650 |
26’’ |
32000-39000 |
10-12 |
41000-65000 |
12-20 |
60000-85000 |
18-25 |
700 |
28’’ |
34000-42000 |
9.0-11 |
45000-72000 |
12-19 |
70000-120000 |
18-30 |
Dimension of 4TPI Nipples and Socket
Nominal Diameter |
Nipple Type |
Sizes of Nipple (mm) |
Sizes of Socket |
Thread |
|||||
mm |
inch |
D |
L |
d2 |
l |
d1 |
H |
mm |
|
Deviation (-0.5-0) |
Deviation (-1-0) |
Deviation (-5-0) |
Deviation (0-0.5) |
Deviation (0-7) |
|||||
200 |
8’’ |
122T4N |
122.24 |
177.80 |
80 |
<7 |
115.92 |
94.90 |
6.35 |
250 |
10’’ |
152T4N |
152.40 |
190.50 |
108.00 |
146.08 |
101.30 |
||
300 |
12’’ |
177T4N |
177.80 |
215.90 |
129.20 |
171.48 |
114.00 |
||
350 |
14’’ |
203T4N |
203.20 |
254.00 |
148.20 |
196.88 |
133.00 |
||
400 |
16’’ |
222T4N |
222.25 |
304.80 |
158.80 |
215.93 |
158.40 |
||
400 |
16’’ |
222T4L |
222.25 |
355.60 |
150.00 |
215.93 |
183.80 |
||
450 |
18’’ |
241T4N |
241.30 |
304.80 |
177.90 |
234.98 |
158.40 |
||
450 |
18’’ |
241T4L |
241.30 |
355.60 |
169.42 |
234.98 |
183.80 |
||
500 |
20’’ |
269T4N |
269.88 |
355.60 |
198.00 |
263.56 |
183.80 |
||
500 |
20’’ |
269T4L |
269.88 |
457.20 |
181.08 |
263.56 |
234.60 |
||
550 |
22’’ |
298T4N |
298.45 |
355.60 |
226.58 |
292.13 |
183.80 |
||
550 |
22’’ |
298T4L |
298.45 |
457.20 |
209.65 |
292.13 |
234.60 |
||
600 |
24’’ |
317T4N |
317.5 |
355.60 |
245.63 |
311.18 |
183.80 |
||
600 |
24’’ |
317T4L |
317.5 |
457.20 |
228.70 |
311.18 |
234.60 |
||
650 |
26’’ |
355T4N |
355.60 |
457.20 |
266.79 |
349.28 |
234.60 |
||
650 |
26’’ |
355T4L |
355.60 |
558.80 |
249.86 |
349.28 |
285.40 |
||
700 |
28’’ |
374T4N |
374.65 |
457.20 |
285.84 |
368.33 |
234.60 |
||
700 |
28’’ |
374T4L |
374.65 |
558.80 |
268.91 |
368.33 |
285.40 |
||
750 |
30’’ |
406T4N |
406.4 |
584.20 |
296.42 |
400.08 |
298.10 |
||
750 |
30’’ |
406T4L |
406.4 |
609.60 |
292.19 |
400.08 |
310.80 |
||
800 |
32’’ |
431T4N |
431.8 |
635.00 |
313.36 |
425.48 |
325.50 |
||
800 |
32’’ |
431T4L |
431.8 |
685.80 |
304.89 |
425.48 |
348.90 |
Dimension of 3TPI Nipples and Socket
Nominal Diameter |
Nipple Type |
Sizes of Nipple (mm) |
Sizes of Socket |
Thread |
|||||
mm |
inch |
D |
L |
d2 |
l
|
d1 |
H |
mm |
|
Deviation (-0.5-0) |
Deviation (-1-0) |
Deviation (-5-0) |
Deviation (0-0.5) |
Deviation (0-7) |
|||||
250 |
10’’ |
155T3N |
155.57 |
220.00 |
103.80 |
<7 |
147.14 |
116.00 |
6.35 |
300 |
12’’ |
177T3N |
177.16 |
270.90 |
116.90 |
168.73 |
141.50 |
||
350 |
14’’ |
215T3N |
215.90 |
304.80 |
150.00 |
207.47 |
158.40 |
||
400 |
16’’ |
215T3L |
215.90 |
304.80 |
150.00 |
207.47 |
158.40 |
||
400 |
16’’ |
241T3N |
241.30 |
338.70 |
169.80 |
232.87 |
175.30 |
||
450 |
18’’ |
241T3L |
241.30 |
338.70 |
169.80 |
232.87 |
175.30 |
||
450 |
18’’ |
273T3N |
273.05 |
355.60 |
198.70 |
264.62 |
183.80 |
||
500 |
20’’ |
273T3L |
273.05 |
355.60 |
198.70 |
264.62 |
183.80 |
||
500 |
20’’ |
298T3N |
298.45 |
372.60 |
221.30 |
290.02 |
192.20 |
||
550 |
22’’ |
298T3N |
298.45 |
372.60 |
221.30 |
290.02 |
192.20 |
3TPI Thread Detail
4TPI Thread Detail
Reference of Torque
Diameter |
mm |
250 |
300 |
350 |
400 |
450 |
500 |
550 |
600 |
650 |
700 |
inch |
10’’ |
12 |
14 |
16 |
18 |
20 |
22 |
24 |
26 |
28 |
|
Torque (N.m) |
400-450 |
500-650 |
700-950 |
850-1150 |
1050-1400 |
1300-1700 |
1850-2400 |
2300-3000 |
3900-4300 |
4400-5200 |
Product detail pictures:
Related Product Guide:
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Original Factory Electrode Graphite Rod - HP Graphite Electrode for Steel Making – MORKIN , The product will supply to all over the world, such as: Washington, Oman, Cologne, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.
By Harriet from Adelaide - 2017.06.22 12:49
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Moira from Norwegian - 2018.12.14 15:26